California Property Tools

California Density Bonus Calculator

Enter the number of units the zoning allows, the category of affordable units and their share of the project. The calculator reads the tables printed in California's Density Bonus Law (Government Code §65915) and returns the bonus percentage, the bonus units after rounding, the total and the number of incentives or concessions, each with the subdivision it comes from. Statute text as read on November 12, 2026.

The greatest number of units allowed under the zoning ordinance, specific plan or land use element of the general plan or, if a range of density is permitted, the greatest number allowed by the specific zoning range, specific plan or land use element applicable to the project, before any bonus (Gov. Code §65915(o)(6)). Base density that results in fractional units is rounded up to the next whole number (§65915(q)); enter the figure after that rounding.

The applicant elects one category (§65915(b)(2)). These are the categories with a printed table in §65915(f).

%

Measured against total units, which leave out units added by the bonus and include units designated to satisfy a local inclusionary zoning requirement (§65915(o)(9)(A)). The table in §65915(f)(1) runs from 10 to 24 percent.

Enter the base number of units and the percentage of affordable units to read the table.

Nothing you enter is stored or sent anywhere; the arithmetic runs in your browser.

Covered: the four categories of §65915(b)(1) that have a printed table. Not covered: the flat-bonus categories (senior housing, units under (b)(1)(E), 100 percent affordable projects), the additional bonus in §65915(v), land donation, the childcare bonus, replacement units under §65915(c)(3) and any local ordinance that grants more. Those are on the Density Bonus Law page.

How the calculator reads the statute

  1. The category. The applicant chooses it: “an applicant who requests a density bonus pursuant to this subdivision shall elect whether the bonus shall be awarded on the basis of subparagraph (A), (B), (C), (D), (E), (F), or (G) of paragraph (1).” (§65915(b)(2)).
  2. The row. The tables in §65915(f) print whole percentages. The calculator takes the row for the highest printed percentage that does not exceed the share you enter; the subdivision does not say how a share between two rows is read.
  3. The units. The row's bonus percentage is applied to the base number of units, and a fraction is rounded up: “All density calculations resulting in fractional units shall be rounded up to the next whole number.” (§65915(f)(5)).
  4. The incentives. The share is read against §65915(d)(2), which sets how many incentives or concessions the project receives.

Worked examples

Three projects, run through the same arithmetic as the calculator above.

  • 100 base units, 10 percent lower income households

    The table in §65915(f)(1) prints a 20 percent bonus at 10 percent. 100 × 20% = 20, so 20 bonus units, for 120 units in all. Incentives or concessions: 1 (§65915(d)(2)(A)).

  • 37 base units, 11 percent very low income households

    The table in §65915(f)(2) prints a 35 percent bonus at 11 percent. 37 × 35% = 12.95, rounded up to 13 bonus units, for 50 units in all. Incentives or concessions: 2 (§65915(d)(2)(B)).

  • 60 base units, 40 percent moderate income, units for sale

    The table in §65915(f)(4) prints a 35 percent bonus at 40 percent. 60 × 35% = 21, so 21 bonus units, for 81 units in all. Incentives or concessions: 3 (§65915(d)(2)(C)).

Density bonus chart: bonus by share of affordable units

The four tables of §65915(f), side by side. Read across from the share of affordable units to the column for the category the project is based on. A dash means that table prints no row at that share: below a table's first row the statute prints no bonus, and above its last row the last printed figure is the highest in the table.

Percentage density bonus by percentage of affordable units, Government Code §65915(f), as read on November 12, 2026. Each column is checked against the statute text when this page is built.
Share of unitsLower income, §65915(f)(1)Very low income, §65915(f)(2)Moderate income, for sale, §65915(f)(4)Lower income students, §65915(f)(3)(C)
5%—20%——
6%—22.5%——
7%—25%——
8%—27.5%——
9%—30%——
10%20%32.5%5%—
11%21.5%35%6%—
12%23%38.75%7%—
13%24.5%42.5%8%—
14%26%46.25%9%—
15%27.5%50%10%—
16%29%—11%—
17%30.5%—12%—
18%32%—13%—
19%33.5%—14%—
20%35%—15%35%
21%38.75%—16%38.75%
22%42.5%—17%42.5%
23%46.25%—18%46.25%
24%50%—19%50%
25%——20%—
26%——21%—
27%——22%—
28%——23%—
29%——24%—
30%——25%—
31%——26%—
32%——27%—
33%——28%—
34%——29%—
35%——30%—
36%——31%—
37%——32%—
38%——33%—
39%——34%—
40%——35%—
41%——38.75%—
42%——42.5%—
43%——46.25%—
44%——50%—

What the share is a share of differs by column: total units for lower income households (§65915(b)(1)(A)); total units for very low income households (§65915(b)(1)(B)); total dwelling units sold to persons and families of moderate income (§65915(b)(1)(D)); total units for lower income students (§65915(b)(1)(F)). This category requires that all units in the development are offered to the public for purchase (§65915(b)(1)(D)). In this category a unit is one rental bed and its pro rata share of associated common area facilities (§65915(b)(1)(F)(ii)).

Incentives or concessions by share

Each figure is the minimum share of units for that number. A dash means §65915(d)(2) prints no threshold for that number in that category.
Incentives or concessionsLower incomeVery low incomeModerate income, units for saleLower income studentsGov. Code
110%5%10%20%§65915(d)(2)(A), (E)
217%10%20%23%§65915(d)(2)(B), (E)
324%15%30%—§65915(d)(2)(C)
4—16%45%—§65915(d)(2)(F)
5100 percent affordable project under §65915(b)(1)(G)§65915(d)(2)(D)

The grounds on which a city may refuse a requested incentive or concession are in §65915(d)(1); they are quoted on the Density Bonus Law page.

What to enter: the statute's definitions

Base number of units. The bonus is measured from the density the site is otherwise allowed:

“density bonus” means a density increase over the otherwise maximum allowable gross residential density, as of the date of application by the applicant to the city, county, or city and county, or, if elected by the applicant, a lesser percentage of density increase, including, but not limited to, no increase in density.— GOV §65915(f)
“Maximum allowable residential density” or “base density” means the greatest number of units allowed under the zoning ordinance, specific plan, or land use element of the general plan, or, if a range of density is permitted, means the greatest number of units allowed by the specific zoning range, specific plan, or land use element of the general plan applicable to the project.— GOV §65915(o)(6)

Share of affordable units. It is a share of total units, which the statute defines so that the bonus units themselves are left out:

“Total units” or “total dwelling units” means a calculation of the number of units that: (i) Excludes a unit added by a density bonus awarded pursuant to this section or any local law granting a greater density bonus. (ii) Includes a unit designated to satisfy an inclusionary zoning requirement of a city, county, or city and county.— GOV §65915(o)(9)(A)

Rounding. Each component is rounded up separately, so enter the base figure after its own rounding:

Each component of any density calculation, including base density and bonus density, resulting in fractional units shall be separately rounded up to the next whole number.— GOV §65915(q)

What changed, and what changes next

  • AB 2433 (Stats. 2026, Ch. 800): GOV §65915 amended

    Takes effect January 1, 2027. Its changes are not yet in the text quoted on this page.

    Bill title as printed: “Housing development: density bonus.” What AB 2433 changes, in the Legislative Counsel's words

    In the bill's own words: SEC. 1

    Bill section SECTION 1 amends GOV §65915; quoted subdivisions (f), (f)(6), (v)(5) (bill version 20250AB243391CHP, chaptered 2026-09-29). Three 2026 bills amend §65915 (AB 2433 Ch. 800, AB 2480 Ch. 801, SB 1383 Ch. 1032). Under SEC. 3 of AB 2433 and SEC. 2(c) of SB 1383, the version that operates on January 1, 2027 is SB 1383 SEC. 1.3, which incorporates all three; the words quoted here are also in SB 1383 SEC. 1.3.

    When an applicant provides a base density study pursuant to paragraph (7) of subdivision (o), the applicant may elect to receive a density bonus in the form of a percentage increase in maximum floor area ratio. (6) The granting of a density bonus shall not be discretionary and shall not require or be interpreted to require a general plan amendment, local coastal plan amendment, zoning change, or other discretionary approval or environmental review under the California Environmental Quality Act (Division 13 (commencing with Section 21000) of the Public Resources Code). (5) More deeply affordable units may be substituted for less deeply affordable units to satisfy the moderate-income unit percentage calculated pursuant to paragraph (2) if all other conditions of this subdivision are met.

    This is the chaptered bill's text for the passages named, not the whole amended section.

  • AB 2480 (Stats. 2026, Ch. 801): GOV §65915 amended

    Takes effect January 1, 2027. Its changes are not yet in the text quoted on this page.

    Bill title as printed: “Housing development: density bonus: student housing developments.” What AB 2480 changes, in the Legislative Counsel's words

  • SB 1383 (Stats. 2026, Ch. 1032): GOV §65915 amended

    Takes effect January 1, 2027. Its changes are not yet in the text quoted on this page.

    Bill title as printed: “Housing development: density bonus: incentives or concessions: labor standards.” What SB 1383 changes, in the Legislative Counsel's words

    In the bill's own words: SEC. 1

    Bill section SECTION 1 amends GOV §65915; quoted subdivisions (k)(1)(B) (bill version 20250SB138394CHP, chaptered 2026-09-30). SB 1383 was chaptered last of the three bills amending §65915; under its SEC. 2(c), SEC. 1.3 (incorporating AB 2433 and AB 2480) is the version that operates. The words quoted here are in SEC. 1.3.

    (B) The reduction or modification in subparagraph (A) shall not, for any building over 85 feet in height above grade, include or relate to a labor standard, as that term is defined in Section 1205 of the Labor Code, that has been adopted by the local government entity. For purposes of this subparagraph, the applicable labor standards are those that do not exceed the requirements of paragraph (8) of subdivision (a) of Section 65913.4, as those requirements existed on December 31, 2025.

    This is the chaptered bill's text for the passages named, not the whole amended section.

Frequently Asked Questions

How is a density bonus calculated in California?

In three steps under Government Code §65915. First, the applicant picks the category the bonus is based on: “an applicant who requests a density bonus pursuant to this subdivision shall elect whether the bonus shall be awarded on the basis of subparagraph (A), (B), (C), (D), (E), (F), or (G) of paragraph (1).” (§65915(b)(2)). Second, the share of affordable units is read against that category's table in §65915(f) to get a bonus percentage; for lower income units the table runs from 20 percent at 10 percent of total units to 50 percent at 24 percent. Third, that percentage is applied to the base density, and a fractional result is rounded up: “All density calculations resulting in fractional units shall be rounded up to the next whole number.” (§65915(f)(5)). This is the text as read on November 12, 2026.

What is the maximum density bonus in California?

For the four categories with a printed table in Government Code §65915(f), the last row of each table is: 50 percent for 24 percent lower income units, 50 percent for 15 percent very low income units, 50 percent for 44 percent moderate-income units in a for-sale development, and 50 percent for 24 percent lower income student units. For a project that is 100 percent affordable under §65915(b)(1)(G), “the density bonus shall be 80 percent of the number of units for lower income households” (§65915(f)(3)(D)(i)), subject to the exceptions in (f)(3)(D)(ii) and (iii). Subdivision (v) adds a further bonus for some projects that reach the top of a table. A city may grant more by its own ordinance (§65915(n)).

Are density bonus units rounded up or down?

Up. Government Code §65915(f)(5) says “All density calculations resulting in fractional units shall be rounded up to the next whole number.” Subdivision (q) adds: “Each component of any density calculation, including base density and bonus density, resulting in fractional units shall be separately rounded up to the next whole number.” So 37 base units with a 35 percent bonus is 12.95, which becomes 13 bonus units. The calculator on this page does that rounding and shows the unrounded figure beside it.

How many incentives or concessions does a density bonus project get?

It depends on the affordable share (Government Code §65915(d)(2)). For lower income units: one at 10%, two at 17%, three at 24%. For very low income units: one at 5%, two at 10%, three at 15%, four at 16%. For moderate-income units in a for-sale development: one at 10%, two at 20%, three at 30%, four at 45%. A 100 percent affordable project under §65915(b)(1)(G) receives five (§65915(d)(2)(D)). The calculator shows the number for the share you enter.

Does this calculator cover senior housing and 100 percent affordable projects?

No. Those categories have a flat bonus, not a table, so there is nothing to look up by share. For senior housing, “the density bonus shall be 20 percent of the number of senior housing units” (Government Code §65915(f)(3)(A)). For a 100 percent affordable project, “the density bonus shall be 80 percent of the number of units for lower income households” (§65915(f)(3)(D)(i)). The calculator also leaves out the additional bonus in §65915(v), land donation under §65915(g), the childcare bonus, replacement units and anything a local ordinance adds. Each of those is set out on our Density Bonus Law page.

Will these density bonus tables change in 2027?

3 bills chaptered in 2026 amend Government Code §65915 on January 1, 2027: AB 2433, AB 2480, SB 1383. Their text is not in the Legislature's code file until that date, so the tables on this page are the ones in force when the statute was read on November 12, 2026. Our 2027 housing laws page quotes what the Legislative Counsel's digest says each bill does.

Statute text on this page: Government Code §65915 to §65918, read November 12, 2026. These laws are amended most years; the dates show how current each quotation is.

Learn More

Source: California Government Code §65915, from the Legislature's bulk data, read on November 12, 2026. Verify the current text on leginfo.legislature.ca.gov before relying on it. Educational information about California law, not legal advice.

Last reviewed: November 2026.